KEY FEATURES/BENEFITS

• Proprietary design meets the strict acceptance criteria in the 2003 and 2006 International Building Code for post-installed anchoring applications
• Category 1 design criteria ICC Report Number ESR-2777
• Superior performance design works in cracked concrete for both seismic and wind load conditions
• Corrosion resistant stainless steel clip increases service life
• 4-Line marking around the length identification stamp allows for post-installation inspection of anchor for both length and code adherence
• 360° Segment contact equalizes the load distribution, providing greater load carrying capacity and a more forgiving Design
• New contour design for ease of installation
• The safe and reliable expansion mechanism of the anchor works in both normal and extreme load conditions
• Dog point section prevents damage during installation
• Through hole installation: The anchor can be passed through a pre-punched hole for ease of installation
• Unique safety shoulder supports the clip when the anchor is under strain

KEY FEATURES/BENEFITS

• Will fit through a 1/16” larger prepunched hole.
• Sets up fast. Needs less rotation to achieve required torque.
• Unique “Safety Shoulder” feature. Supports clip when anchor is under strain, minimizes bolt-end collapse and/or clip slippage under ultimate loading conditions.
• Enlarged dimples on clip. Reduces slip, more responsive in lighter concrete
• 360° segment contact on clip. Equalizes load distribution providing greater load performance carrying capacity and “more forgiving” design

KEY FEATURES/BENEFITS

• Time-Tested, Proven Reliability. An industry standard for over 50 years
• Fully Assembled and Ready to Use. Unparalleled job-site convenience
• BOLT SIZE IS HOLE SIZE.® Allows precision placement of equipment through pre-drilled holes
• Exclusive “Positive Wedge Connections.” Minimizes wedge loosening due to vibratory loads

KEY FEATURES/BENEFITS

• Easy to install — just hammer the center pin and it’s set. Anchor tensions itself automatically, so no wrench is needed
• Visually inspectable — anchor is set when center pin is flush with top of hole
• Depth of hole not critical — no depth gauge required
• No templates required — the actual diameter of the anchor is the same as its nominal diameter
• Yellow dichromate finish for superior corrosion resistance

KEY FEATURES/BENEFITS

• Fully Assembled and Ready to Use. Speeds installation and eliminates the problem of missing components
• Suitable for Wide Variety of Applications
• Available in a variety of head styles to meet all your anchoring needs
• Usable in Multiple Masonry Substrates. Poured concrete, grouted blocks, brick, horizontal mortar joints and hollow concrete blocks

KEY FEATURES/BENEFITS

• Internally Threaded. Wedge anchor performance with the convenience of a drop-in
• Safety Shoulder. Supports clip when anchor is under strain, eliminating bolt-end collapse and/or clip slippage under ultimate loading conditions
• Seismic Rated. Allowable values may be increased 33 1/3 percent for short-term loading in resisting earthquake or wind loads
• Numerous Head-Style Options. May be used with machine screws, tamperproof bolts, threaded rod and a variety of other male-threaded fasteners
• Available in a variety of sizes

KEY FEATURES/BENEFITS

• Ideal for Overhead Applications. Requires relatively shallow embedment and eliminates requirement for rod couplings when threaded rod is dropped from ceiling
• Highly Dependable. Complete anchor setting is assured; simply drive the internal expander plug home with a hammer or mallet
• Lipped Version. Anchor sets flush with concrete

KEY FEATURES/BENEFITS

• Ideal for hollow core, pre-cast and post tension slabs.

KEY FEATURES/BENEFITS

• Cut threads in structural concrete, hollow block, brick, mortar, concrete masonry units and many others
  Step thread design:
  • Increases ease of installation
  • Increases pullout values
• No sleeve or shield required
• Taps its own thread
• Drill bit included in each box

KEY FEATURES/BENEFITS

• Easy to install
• Tamper proof
• Can be used in concrete, block, brick or stone
• Available in variety of head styles. Mushroom head, flat head, round head

KEY FEATURES/BENEFITS

• Uses include fastening into rock, concrete and brick
• Holding power unaffected if bolt is removed and replaced
• One-piece design, made of zinc alloy, is entirely rust-proof

KEY FEATURES/BENEFITS

• Uses include fastening into rock, concrete, brick, etc
• Eliminates high stress points detrimental in fastening into materials of medium hardness, has high gripping power and expands fully
• Ideal for sheer loads or where bolt is subject to side pressure or Vibration
• Does not fracture, permits fastening at any length

KEY FEATURES/BENEFITS

• Quick installation of lightweight fixtures in masonry and Concrete
• Can be used with lag, wood or sheet metal screws
• Expands without turning
• Not affected by moisture or chemicals

KEY FEATURES/BENEFITS

• Medium duty anchor used in concrete, tile, brick, cinder block, mortar and stone
• Used with lag screws
• Rustproof

KEY FEATURES/BENEFITS

• For medium duty use in concrete, brick or stone
• Closed bottom
• Setting tool provided in each box of anchors
• Fits into irregular holes
• Rust proof

KEY FEATURES/BENEFITS

• Available in Zinc or Nylon
• Unique expandable design provides ultimate holding power
• Ideal for fastening to drywall and other low density substrates
• Replaces many types of anchors including molly-type, plastic plugs and toggle type
• Easily removable by simply backing out screw
• No special tools needed. Only a Phillips screw driver or an electric drill

KEY FEATURES/BENEFITS

• For use in hollow drywall, wood, concrete, paneling and masonry tile
• Fast and easy to use
• Inexpensive installation
• Uses screw sizes #6-#16
• If screw is removed, anchor stays in place

KEY FEATURES/BENEFITS

• Spring wing type hollow wall anchor
• Two-part assembly consisting of a machine screw and a spring wing toggle
• For use in block, wallboard and other hollow base material Toggle Bolts

KEY FEATURES/BENEFITS

• Greater holding power than nails or screws in hollow walls
• Use in wallboard, plaster and paneling
• Securely fastens mirrors, pictures, drapery rods, towel bars, etc.
• Fixtures can be removed or replaced without removing anchor

KEY FEATURES/BENEFITS

• Easy and quick installation
• Greater holding power than nails or screws in hollow walls
• Use in wallboard, plaster and paneling
• No predrilling required
• Drives into wall in seconds
• Securely fastens mirrors, pictures, drapery rods, towel bars, etc

KEY FEATURES/BENEFITS

• For light duty use in concrete, block, brick and wallboard
• Reusable Blister box
• Superior in extreme hot or cold environments
• High quality, low cost installation

KEY FEATURES/BENEFITS

• Each size anchor accommodates several screw sizes
• Use with sheet metal screws or wood screws
• Ideal for quick installation of lighter objects to concrete, brick, cinder block, etc.
• Superior in hot or cold environments
• Acid resistant

KEY FEATURES/BENEFITS

• Works in all base materials. Concrete, brick, and stone Masonry
• Wide variety of applications
• Working Range: -15°F to 120°F
• Sets in water-filled and Damp Holes
• Bonds to diamond core drilled holes
• Styrene Free

KEY FEATURES/BENEFITS

• Non-Shrink. Won’t shrink and cause unwanted forces in member.
• Non-Sag. Can be used easily in overhead applications.
• Low Odor. Eliminates annoying odors.
• Solvent Free. Allows for greater flexibility in applications.
• Eliminates Expansion Forces. Can be used close to a free edge.
• Long Life. Two year shelf life and not sensitive to UV light or heat after cured
• Wide Range of Applications. Can be used in a wide variety of applications, including concrete, masonry, and mortar.
• Water Insensitive Before, During & After Cure. Can be used in water-filled or moist holes.
• Resists tensile and shear loads due to earthquake and wind. Can be used in areas with seismic concerns.
• Weather Resistant. Can be used in locations subject to severe exterior weather conditions.

KEY FEATURES/BENEFITS

• Easy to Install. No setting tool necessary, just use a hammer to drive in
• Economical. Minimal waste, use only the amount you require.
• Reliable. Works in all types of weather
• Mistake Proof. 3/8” through 5/8” Capsules can be set either end up. Set larger capsules rounded end down
• Eliminates Expansion Forces. Can be used close to a free edge.
• Clean. No disposal of excess material necessary
• Less Breakage. Innovative package design

KEY FEATURES/BENEFITS

• No Expansion Stress. “Synthetic mortar” bonds stud assembly to concrete. Also performs in lightweight and soft masonry substrates
• Useful in Dynamic Load Environment. Chemical bonding is less likely to “work loose” under shock conditions and vibratory loads
• Less Breakage. Innovative package design
• No Waste.